HP Spectre 13-ap0000 Maintenance and Service Guide - Page 49
Wwan Module, Caution, Important
View all HP Spectre 13-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
4. Rotate the power button (1), and then remove the power button (2). Reverse this procedure to install the power button and the power button board. WWAN module Description HP 7560 LTE/ADV+ 4G with GPS M.2 Spare part number L27188-005 CAUTION: To prevent an unresponsive system, replace the wireless board only with a wireless board authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the board and then receive a warning message, remove the board to restore device functionality, and then contact technical support. IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the WWAN module, follow these steps 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by firstunplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. Remove the TouchPad (see TouchPad on page 37). Remove the WWAN module: WWAN module 41