HP Spectre 13-ap0000 Maintenance and Service Guide - Page 51
Solid-state drive, Disconnect all external devices from the computer.
View all HP Spectre 13-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Solid-state drive Description 1-TB, 2280, PCIe3×4, NVMe solid-state drive with TLC 256-GB, M.2 2280, PCIe3×4, NVMe, SS solid-state drive with TLC 2-TB, 2280, PCIe3×4, NVMe solid-state drive with TLC 512-GB, M.2 2280, PCIe3×4, NVMe, SS solid-state drive with TLC Spare part number L37642-001 L37643-001 L37644-001 L37645-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 34). 5. Remove the battery (see Battery on page 35). Remove the solid-state drive module: 1. Remove the metal cover on top of the solid-state drive module. 2. Remove the Phillips M2.0×3.0 screw that secures the solid-state drive module to the computer (1). Solid-state drive 43