HP Spectre 13-ap0000 Maintenance and Service Guide - Page 54
IR sensor, System board
View all HP Spectre 13-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
IR sensor Description IR sensor Spare Part Number L37657-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the IR sensor, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off/or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 34). 5. Remove the battery (see Battery on page 35). Remove the IR sensor: ▲ Turn over the left fan, and pull off the IR sensor. Reverse this procedure to install the IR sensor. System board NOTE: All system board spare part kits include a processor and replacement thermal material. 46 Chapter 5 Removal and replacement procedures for authorized service provider parts