HP Spectre 13-ap0000 Maintenance and Service Guide - Page 59
Display assembly, Remove the fans see
View all HP Spectre 13-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Reverse this procedure to install the audio board. Display assembly Description 13.3-in, FHD, AntiGlare, Ultra Slim TouchScreen display assembly with privacy filter 13.3-in, FHD, BrightView, Ultra Slim TouchScreen display assembly 13.3-in, FHD, BrightView, Ultra Slim TouchScreen display assembly 13.3-in, UHD, BrightView, Ultra Slim TouchScreen display assembly 13.3-in, UHD, BrightView, Ultra Slim TouchScreen display assembly 13.3-in, FHD, AntiGlare, Ultra Slim TouchScreen display assembly with privacy filter with WWAN 13.3-in, FHD, BrightView, Ultra Slim TouchScreen display assembly with WWAN 13.3-in, FHD, BrightView, Ultra Slim TouchScreen display assembly with WWAN Spare part numbers L37647-001 L37648-001 L37649-001 L37650-001 L37651-001 L37905-001 L37906-001 L37907-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. 1. Turn off the computer. If you are unsure whether the computer is off/or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Before removing the display assembly, follow these steps: 1. Remove the bottom cover (see Bottom cover on page 34). 2. Remove the battery (see Battery on page 35). 3. Remove the TouchPad (see TouchPad on page 37). 4. Remove the fans (see Fans on page 44). 5. Remove the system board (see System board on page 46). Remove the display assembly: 1. Disconnect the left display cable (1), and then disconnect the right display cable (2). Display assembly 51