HP Spectre 13-ap0000 Maintenance and Service Guide - Page 52

Fans

Get HP Spectre 13-ap0000 PDF manuals and user guides View all HP Spectre 13-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

3. Remove the solid-state drive by pulling it away from the socket (2). Reverse this procedure to install the solid-state drive. Fans Description Fan (left) Fan (right) Spare part number L37660-001 L38013-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 34). 5. Remove the battery (see Battery on page 35). Remove the fan: 1. Disconnect the antenna cables (1)). 2. Release the ZIF connector (2), and then disconnect the fan cable (3). 3. Disconnect the IR sensor cable (4). 44 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
3.
Remove the solid-state drive by pulling it away from the socket
(2)
.
Reverse this procedure to install the solid-state drive.
Fans
Description
Spare part number
Fan (left)
L37660-001
Fan (right)
L38013-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
34
).
5.
Remove the battery (see
Battery
on page
35
).
Remove the fan:
1.
Disconnect the antenna cables
(1))
.
2.
Release the ZIF connector
(2)
, and then disconnect the fan cable
(3)
.
3.
Disconnect the IR sensor cable
(4)
.
44
Chapter 5
Removal and replacement procedures for authorized service provider parts