HP StorageWorks 2/128 HP StorageWorks Core Switch 2/64 and SAN Director 2/128 - Page 70
Table 8 CP card LED patterns, Check for out-of-bounds
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Table 8 CP card LED patterns LED location/ Color purpose Status Recommended action Power Steady green CP card is not receiving power. No action required. No light (LED is off) CP card is not receiving power. Ensure card is firmly seated and has power. Status No light (LED is off) CP card is either healthy or does not have power. Verify that the power LED is on. Steady yellow CP card is faulty or the switch is still booting. Ensure card is firmly seated and switch has completed booting. If LED remains yellow, consult switch supplier. Slow-flashing yellow (on 2 seconds; then off 2 seconds) CP card is not seated Pull card out and reseat it. If correctly or is faulty. LED continues to flash, replace card. Fast-flashing yellow Environmental range (on 1/2 second; then exceeded. off 1/2 second) Check for out-of-bounds environmental condition and correct it. Ethernet Link Status (upper LED beneath Ethernet port) No light (LED is off) Either an Ethernet link is not detected, or it does not have incoming power. Ensure the card has power, Ethernet cable is firmly seated, and connected device is functioning. Flickering green/yellow Ethernet link is healthy No action required. and traffic is flowing through port. 70 Operating the switch