HP StorageWorks 2/8-EL quickloop fabric assist version 3.0.x user guide - Page 28
Configuration 4: Mixed QuickLoop Mode and Fabric Mode, QuickLoop configuration in mixed mode
View all HP StorageWorks 2/8-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Using Quick Loop Configuration 4: Mixed QuickLoop Mode and Fabric Mode Figure 4 shows a sample configuration of a mixed mode environment, with ports set on an individual basis to either QuickLoop mode or Fabric mode. In this example, a fabric is formed from two cascaded switches, Compaq 1 and Compaq 2. ■ The ports to which the looplets within the QuickLoop are attached, ports (1,14), (1,15), (2,0), and (2,1), are all QuickLoop-enabled FL_Ports. ■ Private target device a and public target device f are attached to FL_Ports (1,0) and (2,14). ■ Public host G is attached to an F_Port, (1,1). ■ Because it is in the same QuickLoop, private host J can access the private target devices b and c even though they are attached to a different switch. QuickLoop a b J f H 0 14 Compaq 1 1 15 0 14 Compaq 2 1 15 G c d e Host devices that are FC-FLA compliant (public hosts) Host device capable of PLDA only (private hosts) Target devices that are FC-FLA compliant (public targets) Target devices capable of PLDA only (private targets) Figure 4: QuickLoop configuration in mixed mode CXO7793A 28 Quickloop Fabric Assist User Guide