HP StorageWorks 2/8-EL quickloop fabric assist version 3.0.x user guide - Page 43

Fabric Assist Mode Telnet Commands 5 This chapter provides information about the telnet commands available for managing Fabric Assist mode and is organized as follows: ■ Overview on page 43 ■ Telnet Commands on page 45 Overview The telnet commands allow management of Fabric Assist mode. These commands become available through the shell admin account when the Zoning license key is installed. To use a telnet command, log into the relevant switch with administrative privileges, enter the command along with any required operands, and press Enter. Note: Fabric Assist mode can be accessed simultaneously from different connections, by telnet or the web. If this happens, changes from one connection might not be updated to the other, and some may be lost. If "Committing configuration..." displays during a telnet session, the configuration may have been modified from another connection. The telnet commands for administering Fabric Assist mode zones and hosts operating in Fabric Assist mode are summarized in Table 1. Quickloop Fabric Assist User Guide 43