HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 254
Displays the channel HBA port World Wide Name., Same as Link Incident Type.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. ficonShow 2-220 Link Incident Description Same as Link Incident Type. Link Incident Type Indicates the link incident type as one of the following: • Bit-error-rate threshold exceeded • Loss of signal or synchronization • NOS recognized • Primitive sequence timeout • Invalid primitive sequence for port state • Listener PIDSame as PID. Listener Port Type Same as Port Type. Listener Port WWN Displays the channel HBA port World Wide Name. Listener Type Indicates the listener type as follows: Conditional This port receives a link incident record if no other recipients from the established registration list have been chosen. Unconditional This port is always chosen as a recipient of a link incident record. Manufacturer Displays the manufacturer name or code. Model Number Displays the model number. Node Parameters Same as Parameters. Parameters Displays the node type for the switch in three bytes, 0xAABBCC: Byte AA 0x20 FC-SB-2 and updates. Byte BB 0x0a Switch. Byte CC 0x00 Port number. It is dynamically assigned whenever a link incident occurs. Parm Displays the incident node parameters type in three bytes, 0xAABBCC: Byte AA 0x00 Reserved. 0x20 FC-SB-2 and updates. 0x40 Other FC-4s including FCP and updates. 0x60 FC-SB-2 and updates and other FC-4s including FCP and updates. 0x80 FC-4 support not specified. 0xa0 Reserved. 0xc0 Reserved. 0xe0 Vendor specific. Fabric OS Command Reference Manual Publication Number: 53-1000240-01