HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 634
setEsdMode, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 634 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. setEsdMode setEsdMode Enables or disables ESD mode. Synopsis setesdmode [mode | -show] Description Use this command to enable or disable ESD mode. The mode is saved in flash memory and stays in that mode until the next execution of setEsdMode. The mode becomes active as soon as this command is executed. It does not require a reboot to take effect. ESD mode modifies the behavior of the diagnostic test methods and post scripts. The exact behavior varies but most commonly consists of disabling the ports defined with diagEsdPorts when spinSilk or other functional tests are run for ESD or EMI testing purposes. Note You can issue this command on the FR4-18i blade in a SilkWorm chassis; however, the command is not supported by the SilkWorm platform and does not effect any other feature operations. This availability is offered to maintain consistency across a mixed-blade environment. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: mode Specify 1 to enable ESD mode, 0 to disable ESD mode. This operand is optional. -show Specify this operand to display the current mode setting. This operand is optional. If no operand is specified, the current value displays. To display the ESD mode: switch:admin> setesdmode -show Esd Mode is 0 (Disabled). See Also spinSilk 2-600 Fabric OS Command Reference Manual Publication Number: 53-1000240-01