HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 647
shellFlowControlEnable, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 647 highlights
Note: Enter commands in lowercase only; mixed case is for readability. shellFlowControlEnable 2 shellFlowControlEnable Enables XON/XOFF flow control on the console serial port. Synopsis shellflowcontrolenable Description Use this command to enable XON/XOFF flow control to the shell task. Flow control is disabled by default. Because this command changes the flow control on the console serial port, it must be executed from a session that is logged in from the console serial port. This command cannot run from a telnet session. This setting saves in the configuration database; therefore, persistent across reboots and power cycles. On dual control processor (CP) systems, a reboot on the standby CP is required for this command to take effect. No action is required on the active CP. Caution If flow control is enabled and if the console output is suspended for an extended period of time, the switch might reboot. It is recommended to disable the flow control, using shellFlowControlDisable. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To enable flow control: switch:admin> shellflowcontrolenable Enabling flowcontrol flow control is now enabled See Also shellFlowControlDisable Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-613