HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 768
zoneAdd, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 768 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. zoneAdd zoneAdd Adds a member to the zone. Synopsis zoneadd "zoneName", "member;member" Description Use this command to add one or more members to an existing zone. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to non-volitile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Note This command requires a Brocade Advanced Zoning license. When secure mode is enabled, this command can be issued only from the primary FCS switch. Operands Examples The following operands are required: "zoneName" Specify the name of an existing zone, in quotation marks. Quotation marks are optional. This operand is required. "member" Specify a member or list of members to be added, in quotation marks, separated by semicolons. Quotation marks are required. Valid values can be one or more of the following: • A switch domain and port area number pair; for example, "2, 20". View the area numbers for ports using the switchShow command. • Node or port WWN. • QuickLoop AL_PA. • Zone alias name. To add aliases for three disk arrays to "Blue_zone": sw5:admin> zoneadd "Blue_Zone", "array3; array4; array5" See Also zoneCreate, zoneDelete, zoneRemove, zoneShow 2-734 Fabric OS Command Reference Manual Publication Number: 53-1000240-01