HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 278
fwAlarmsFilterSet, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. fwAlarmsFilterSet fwAlarmsFilterSet Enables or disables alarms for Fabric Watch. Synopsis fwalarmsfilterset [mode] Description Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all nonenvironment class alarms are suppressed. By turning on the alarms, all class alarms are generated. Note This command requires a Fabric Watch license. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operand: mode Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is specified, the default value is 0 (alarms deactivated). This operand is optional. To enable alarms in Fabric Watch: switch:admin> fwalarmsfilterset Committing configuration...done. FW: Alarms are disabled switch:admin> fwalarmsfilterset 1 Committing configuration...done. FW: Alarms are enabled See Also fwAlarmsFilterShow 2-244 Fabric OS Command Reference Manual Publication Number: 53-1000240-01