HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 674
spd_mode, lb_mode, verbose, ports
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 674 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. spinSilk -spd_mode mode -verbose mode -ports itemlist Specify the speed mode for the test. This parameter is used only for Bloom and Condor ASIC-based products, where it controls the speed at which each port is operated. For 1 Gbit/sec-only products, it is ignored. The exact operation of modes 5 through 8 depends upon the loopback mode selected. When speed modes 5 through 8 are used with cables, they must be connected EVEN to ODD or the test will fail. 0 Run test at 1 Gbit/sec, 2 Gbit/sec, and 4 Gbit/sec. 1 Run test at 1 Gbit/sec. 2 Run test at 2 Gbit/sec (Bloom default). 4 Run test at 4 Gbit/sec (Condor default). For -lb_mode set to 1, the following speed modes are available to test the speed negotiation: 5 Set all even ports' speed to 1 Gbit/sec; set all odd ports' speed to auto negotiate. 6 Set all even ports' speed to 2 Gbit/sec; set all odd ports' speed to auto negotiate. 7 Set all even ports' speed to auto negotiate; set all odd ports' speed to 1 Gbit/sec. 8 Set all even ports' speed to auto negotiate; set all odd ports' speed to 2 Gbit/sec. For -lb_mode set to 2 or 3, the following speed modes are available to test FIFO underrun: 7,5 Set all even ports' speed to 2 Gbit/sec; set all odd ports' speed to 1 Gbit/ sec. 8,6 Set all even ports' speed to 1 Gbit/sec; set all odd ports' speed to 2 Gbit/ sec. Specify a nonzero value to display more detailed information during the test. This mode should be used for debugging purposes. This operand is optional. Specify a list of user ports to test. By default, all of the user ports in the current switch are tested. Refer to itemList for further details. 2-640 Fabric OS Command Reference Manual Publication Number: 53-1000240-01