HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 406
An SCSI target, Physical Unknowninitiator/target.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 406 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. nsShow Operands This command has the following operands: -r Replaces the TTL attribute output with SCR (state change registration) information in the display. This value indicates what type of RSCN a device registers to receive. Values include: SCR=0 Reserved. SCR=1 Fabric detected registration. Register to receive all RSCN requests issued by the fabric controller for events detected by the fabric. SCR=2 Nx_Port detected registration. Register to receive all RSCN requests issued for events detected by the affected Nx_Port. SCR=3 Register to receive all RSCN request issued. The RSCN request returns all effected N_Port_ID pages. -t Displays the device type. Of the two device type parts, the first part indicates the origination of the device. Currently, four originations are defined: Physical Device connected to the Nx_Port, using FLOGI to login to the switch Virtual Contrived device by the switch NPV Device connected to the Nx_Port, using FDISC to log in to the switch iSCSI Device connected to the iSCSI port The second part indicates the role of the device. Currently, four roles are defined: Unknown (initiator/target) Device role is not detected Initiator An SCSI initiator Target An SCSI target Initiator+Target Both an SCSI initiator and an SCSI target Note Fabric OS v4.2.x or earlier does not include device type information. After a nondisruptive upgrade from those Fabric OS versions, the device type displays as "Physical Unknown(initiator/target)". 2-372 Fabric OS Command Reference Manual Publication Number: 53-1000240-01