HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 704
switchEnable, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 704 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. switchEnable switchEnable Enables the switch. Synopsis switchenable Description Use this command to enable the switch. All Fibre Channel ports that passed POST are enabled. They can come online if connected to a device, or will remain offline if disconnected. Use switchEnable if you disable the switch to make configuration changes or to run diagnostics. If the switch is connected to a fabric, it rejoins the fabric. If this switch remains the principal switch, then it assigns itself a domain ID. If another switch assumes the principal role, then this switch becomes a subordinate switch and accepts a domain ID from the principal. Refer to FC-SW for a complete description of this process. As each port is enabled, the front panel LED changes to green for online ports, black for disconnected ports, or yellow for uninitialized ports. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To enable a switch: switch:admin> switchenable See Also switchCfgPersistentDisable, switchCfgPersistentEnable, switchDisable, switchShow 2-670 Fabric OS Command Reference Manual Publication Number: 53-1000240-01