HP StoreOnce D2D4324 HP D2D Gen2E Backup Systems Maintenance and Service Guide - Page 11
IMPORTANT, HP D2D4312 flash memory module, HP StoreOnce D2D, Backup System User Guide - storeonce d2d backup system
View all HP StoreOnce D2D4324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4. Be sure to update the HP D2D software to the latest version. This is done from the Web Management Interface (Settings/Software page), as described in the HP StoreOnce D2D Backup System User Guide. IMPORTANT: If your replacement flash stick is at a lower revision than the one it replaces, you may experience a message of "Devices Starting" or "Initialising". This message will also occur, if the D2D Backup System did not shutdown correctly. In this case, please wait a minimum of 12 hours before updating software. Figure 4 HP D2D4312 flash memory module Figure 5 HP D2D4106 or HP D2D4112 flash memory module Replacing the memory module 11
4.
Be sure to update the HP D2D software to the latest version. This is done from the Web
Management Interface (Settings/Software page), as described in the
HP StoreOnce D2D
Backup System User Guide
.
IMPORTANT:
If your replacement flash stick is at a lower revision than the one it replaces,
you may experience a message of “Devices Starting” or “Initialising". This message will also
occur, if the D2D Backup System did not shutdown correctly. In this case, please wait a
minimum of 12 hours before updating software.
Figure 4 HP D2D4312 flash memory module
Figure 5 HP D2D4106 or HP D2D4112 flash memory module
Replacing the memory module
11