HP Stream x360 Maintenance and Service Guide - Page 40
Reverse this procedure to install the WLAN module.
View all HP Stream x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: If the WLAN antenna cables are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. 34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
3.
Remove the WLAN module
(3)
by pulling the module away from the slot at an angle.
NOTE:
If the WLAN antenna cables are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
34
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts