HP Stream x360 Maintenance and Service Guide - Page 48

TouchPad, Remove the TouchPad

Get HP Stream x360 PDF manuals and user guides View all HP Stream x360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

TouchPad Description TouchPad (includes bracket and cable) Spare part number 794302-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 40). Remove the TouchPad: 1. Disconnect the TouchPad cable from the system board by lifting the ZIF connector (1), and then removing the TouchPad cable from the system board connector. The cable is held in place with adhesive. 2. Remove three Phillips PM2.0×2.0 broadhead screws (2) that secure the Touchpad to the computer. 3. Remove the EMI tape from the TouchPad. 4. Lift and remove the TouchPad (3) from the computer. Reverse this procedure to install the TouchPad. 42 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
TouchPad
Description
Spare part number
TouchPad (includes bracket and cable)
794302-001
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
28
).
5.
Remove the battery (see
Battery
on page
40
).
Remove the TouchPad:
1.
Disconnect the TouchPad cable from the system board by lifting the ZIF connector
(1)
, and then
removing the TouchPad cable from the system board connector. The cable is held in place with
adhesive.
2.
Remove three Phillips PM2.0×2.0 broadhead screws
(2)
that secure the Touchpad to the computer.
3.
Remove the EMI tape from the TouchPad.
4.
Lift and remove the TouchPad
(3)
from the computer.
Reverse this procedure to install the TouchPad.
42
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts