HP TouchSmart 310-1033 Upgrading and Servicing - Page 20

Installing a New Memory Card NOTE: The replacement memory card may not look exactly the same as the original drive due to different manufacturers or models. Hewlett-Packard always provides quality parts that meet or exceed your original computer specifications. IMPORTANT: If you are replacing both cards, you must replace the lower one before replacing the upper one. 1 Orient the new memory card so that the notch on the edge of the card faces forward and is on the right. 3 Make sure the card is pressed all the way into the socket and then gently push down on the card to snap it into place. 2 Holding the card by its edges, slide it all the way into the slot. 4 If you are replacing both memory cards, repeat steps 2 and 3 with the second card. 5 Align the slots on the side of the back cover with the notches on the right side of the face-down computer. 18 628371-001 - Upgrading or Replacing Memory