HP Vectra VEi8 HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio
HP Vectra VEi8 Manual
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Vectra VEi8 manual content summary:
- HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 1
3COM Etherlink III 3C509B ISA 10BT Network Adapter Installation Guide - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 2
of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. MMXTM is a trademark of Intel Corporation. Pentium® is a registered - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 3
into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards. ISA cards: • For ISA network adapters, start the configuration tool provided in driver - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 4
General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS. - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 5
I/O Address Vectra Vli8 5 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 Power on the system and start Windows 95SR2.5. 2 From the 3COM 3C509B driver disk, run PREINSTL.EXE. 3 Shutdown and power down the system. With the HP Vectra turned off, install the 3COM 3C509B network adapter into - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 6
will automatically recognize the 3COM 3C509B network adapter as "3Com 3C509B EtherLink III". 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on "Next" from the Update Device Driver Wizard dialog box. 12 When Windows 95 detects the updated driver, "3Com EtherLink III ISA (3C509b - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 7
I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 Power on the system and start Windows 95SR2.5. 2 From the 3COM 3C509B driver disk, run PREINSTL.EXE. 3 Shutdown and power down the system. With the HP Vectra turned off, install the 3COM 3C509B network adapter into - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 8
will automatically recognize the 3COM 3C509B network adapter as "3Com 3C509B EtherLink III". 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on "Next" from the Update Device Driver Wizard dialog box. 12 When Windows 95 detects the updated driver, "3Com EtherLink III ISA (3C509b - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 9
I/O Address Vectra Vli8 5 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 Power on the system and start Windows 95SR2.5. 2 From the 3COM 3C509B driver disk, run PREINSTL.EXE. 3 Shutdown and power down the system. With the HP Vectra turned off, install the 3COM 3C509B network adapter into - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 10
will automatically recognize the 3COM 3C509B network adapter as "3Com 3C509B EtherLink III". 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on "Next" from the Update Device Driver Wizard dialog box. 12 When Windows 95 detects the updated driver, "3Com EtherLink III ISA (3C509b - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 11
ISA 10BT Network Adapter Connecting to a NetWare 3.12 Server 26 Novell NetWare Client Novell NetWare Client 3COM Etherlink III Bus-Master PCI Ethernet Adapter IPX 32-bit Protocol for the Novell NetWare Client IPX/SPX-compatible Protocol NetBEUI 27 When prompted, specify the path to your Windows 95 - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 12
I/O Address Vectra Vli8 05 210 Vectra VEi7 03 210 Vectra VEi8 07 210 Procedure 1 Power on the system and start Windows 95SR2.5. 2 From the 3COM 3C509B driver disk, run PREINSTL.EXE. 3 Shutdown and power down the system. With the HP Vectra turned off, install the 3COM 3C509B network adapter into - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 13
will automatically recognize the 3COM 3C509B network adapter as "3Com 3C509B EtherLink III". 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on "Next" from the Update Device Driver Wizard dialog box. 12 When Windows 95 detects the updated driver, "3Com EtherLink III ISA (3C509b - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 14
ISA 10BT Network Adapter Connecting to a NetWare 4.11 Server 26 Novell NetWare Client Novell NetWare Client 3COM Etherlink III Bus-Master PCI Ethernet Adapter IPX 32-bit Protocol for the Novell NetWare Client IPX/SPX-compatible Protocol NetBEUI 27 When prompted, specify the path to your Windows 95 - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 15
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 5 300 Vectra VEi7 5 300 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 16
have the required information). 18 At the "Network Services:" prompt, accept default settings and click on "Next". 19 Click on "Next" to continue the network card installation. 20 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 17
and restart your computer for the new settings to take effect. 29 Log onto Windows NT4 Workstation with administrator privileges. 30 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 31 Install the Hewlett-Packard Soft-Power Down application once - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 18
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 300 Vectra VEi7 05 300 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 19
have the required information). 18 At the "Network Services:" prompt, accept default settings and click on "Next". 19 Click on "Next" to continue the network card installation. 20 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 20
and restart your computer for the new settings to take effect. 29 Log onto Windows NT4 Workstation with administrator privileges. 30 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 31 Install the Hewlett-Packard Soft-Power Down application once - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 21
Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 300 Vectra VEi7 05 300 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 22
have the required information). 18 At the "Network Services:" prompt, accept default settings and click on "Next". 19 Click on "Next" to continue the network card installation. 20 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 23
Contact your network administrator if you do not have the required information). 36 Click on the "Login" tab and specify your Name and Password to login. 37 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 38 Install the Hewlett-Packard Soft Power - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 24
Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 server that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 300 Vectra VEi7 05 300 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 25
have the required information). 18 At the "Network Services:" prompt, accept default settings and click on "Next". 19 Click on "Next" to continue the network card installation. 20 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 26
Contact your network administrator if you do not have the required information). 36 Click on the "Login" tab and specify your Name and Password to login. 37 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 38 Install the Hewlett-Packard Soft Power - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 27
NT 3.51 Service Pack 5. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 10 300 Vectra VEi7 05 300 Vectra VEi8 05 300 Procedure - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 28
following "Network Adapter Card Detection" window. 14 From the "Drop Down List", scroll down and select " Requires disk from manufacturer", then click on "Continue". 15 Set the path to "A:\" in the "Insert Disk" dialog box, and then insert the 3COM driver disk in the floppy drive and click - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 29
NT 3.51 Service Pack 5. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 10 300 Vectra VEi7 05 300 Vectra VEi8 05 300 Procedure - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 30
following "Network Adapter Card Detection" window. 14 From the "Drop Down List", scroll down and select " Requires disk from manufacturer", then click on "Continue". 15 Set the path to "A:\" in the "Insert Disk" dialog box, and then insert the 3COM driver disk in the floppy drive and click - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 31
Windows NT 3.51 Service Pack 5. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 10 300 Vectra VEi7 05 300 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 32
following "Network Adapter Card Detection" window. 14 From the "Drop Down List", scroll down and select " Requires disk from manufacturer", then click on "Continue". 15 Set the path to "A:\" in the "Insert Disk" dialog box, and then insert the 3COM driver disk in the floppy drive and click - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 33
11 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Novell NetWare 4.11 Server 26 Click on the "Reboot" button to restart the machine for the changes to take effect. 27 Install the Windows NT3.51 Service Pack 5 application. - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 34
Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 300 Vectra VEi7 05 300 Vectra VEi8 05 300 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 35
Adapter". 12 Click "OK" to accept the default choice of "Unlisted or Updated Network Adapter". 13 Type the path "A:\WFW311" in the "Install Driver" dialog box, and then insert the 3COM 3C509B driver disk into the floppy drive, and click "OK". 14 Select "3COM EtherLink III (3C5X9)" in the "Unlisted - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 36
11 Server system that supports IPX network protocol. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 210 Vectra VEi7 05 300 Vectra VEi8 05 300 Procedure 1 With the HP Vectra turned off, install the - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 37
Board selection. 11 Insert the 3COM 3C509B driver disk into the floppy drive. 12 Type the path "A:\NWCLIENT" when prompted and press "Enter". 13 Select "3Com EtherLink III Parallel Tasking Family" and hit "Enter". 14 Accept the default network board settings and press "F10" to save it. 15 Select - HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 38
- HP Vectra VEi8 | HP Vectra VLi8, 3 COM Etherlink III ISA 10BT Card, Installatio - Page 39
3COM Etherlink III 3C509B ISA
10BT Network Adapter
Installation Guide