HP Vectra VL800 hp vectra vl800, upgrade and installation guide for minitower - Page 40

Setup, HP Image Creation &amp, Recovery CD-ROM

Page 40 highlights

2 Installing and Replacing Hardware Parts in Your PC Installing a Second Hard Disk Drive NOTE 7 Replace the cover (refer to page 25 for instructions). 8 Go to page 45 to complete the installation. If you intend to boot from the newly installed drive, ensure that you have configured Setup to do this. Also ensure that you have installed all the required operating system and HP drivers on the newly installed drive. To reinstall operating system and HP drivers, use the HP Image Creation & Recovery CD-ROM provided with the PC. In addition, you can find the most up-to-date versions of HP drivers on HP's Web site at: www.hp.com/go/vectrasupport. 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

2
Installing and Replacing Hardware Parts in Your PC
Installing a Second Hard Disk Drive
7
Replace the cover (refer to page 25 for instructions).
8
Go to page 45 to complete the installation.
NOTE
If you intend to boot from the newly installed drive, ensure that you have
configured
Setup
to do this. Also ensure that you have installed all the
required operating system and HP drivers on the newly installed drive. To
reinstall operating system and HP drivers, use the
HP Image Creation &
Recovery CD-ROM
provided with the PC. In addition, you can find the most
up-to-date versions of HP drivers on HP’s Web site at:
www.hp.com/go/vectrasupport
.
40