HP Vectra VL800 hp vectra vl800, upgrade and installation guide for minitower - Page 47
Replacing the Power Supply Unit, Removing the, Power Supply Unit
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2 Installing and Replacing Hardware Parts in Your PC Replacing the Power Supply Unit Replacing the Power Supply Unit WARNING Removing the Power Supply Unit Hewlett-Packard does not support power supply upgrades. This information is provided to help you replace a defective power supply unit. For your safety, only replace a power supply unit with a unit provided by HP support services. 1 Switch off the display and PC. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC's cover (refer to page 25 for instructions). 3 Lay the minitower on its side. 4 Remove all internal power supply connectors. 5 Remove the four screws located on the rear of the chassis that secure the power supply unit in position. 6 Push the power supply from the rear to slide it forward, disengage the hinges and remove the power supply. 47