HP Vectra VL800 hp vectra vl800, upgrade and installation guide for minitower - Page 55
System Board Switches, Switch, Default Position, To Con Do Not change Default Settings
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2 Installing and Replacing Hardware Parts in Your PC System Board Switches System Board Switches There are ten system board switches used for configuration, numbered from 1 to 10. Of these a certain number are reserved and should not be modified, otherwise it could lead to a system failure. Switch Default Position To Configure: 1-5 OFF Reserved. Do Not change Default Settings 6 ON Enables keyboard power-on. OFF disables this option. 7 OFF Enables normal modes. ON enables the BIOS recovery mode at next boot. 8 OFF Retains CMOS memory. ON clears CMOS memory at next boot. 9 OFF Enables User and System Administrator passwords. ON clears the passwords at next boot. 10 OFF Location of system board switches 55
2
Installing and Replacing Hardware Parts in Your PC
System Board Switches
System Board Switches
There are ten system board switches used for configuration, numbered
from 1 to 10. Of these a certain number are reserved and should not be
modified, otherwise it could lead to a system failure.
Switch
Default Position
To Configure:
1-5
OFF
Reserved.
Do Not change Default Settings
6
ON
Enables keyboard power-on.
OFF disables this option.
7
OFF
Enables normal modes.
ON enables the BIOS recovery mode at next boot.
8
OFF
Retains CMOS memory.
ON clears CMOS memory at next boot.
9
OFF
Enables User and System Administrator passwords.
ON clears the passwords at next boot.
10
OFF
Location of system
board switches
55