HP Vectra VL800 hp vectra vl800, upgrade and installation guide for minitower - Page 51
power and telecommunications cables., When you start the PC
View all HP Vectra VL800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2 Installing and Replacing Hardware Parts in Your PC Replacing the Processor 4 Attach the heatsink to the processor then secure it in place using the four springs and four screws. 5 Connect the heatsink power connector to the system board. 6 Replace the PC's cover (refer to page 25 for instructions). Reconnect all the power and telecommunications cables. When you start the PC, you should check that the processor has been correctly identified (refer to "Viewing the Summary Screen" on page 18). 51
2
Installing and Replacing Hardware Parts in Your PC
Replacing the Processor
4
Attach the heatsink to the processor then secure it in place using the
four springs and four screws.
5
Connect the heatsink power connector to the system board.
6
Replace the PC’s cover (refer to page 25 for instructions). Reconnect all the
power and telecommunications cables.
When you start the PC, you should check that the processor has been
correctly identified (refer to “Viewing the Summary Screen” on page 18).
51