HP Workstation xw4100 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 226
disk show space
View all HP Workstation xw4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Adaptec SCSI RAID Software Reference Guide disk show space To display space usage information on a SCSI disk, use the disk show space command. Syntax disk show space [/all{=boolean}] [{scsi_device}] Parameters {scsi_device} Specifies the ID for the SCSI device for which you want to display space usage information. A SCSI ID consists of a SCSI channel number (for example, 0, 1, 2, 3, etc.), a SCSI device ID (0 through 15 inclusive), and a SCSI device logical unit number (0 through 7 inclusive). See the scsi_device section on page 3-7 for more information on how to specify the SCSI device. Switches /all{=boolean} Specifies whether to show space usage information for all SCSI disks on the currently opened controller. If you set this switch to TRUE, the command shows space usage information for all SCSI disks on the currently opened controller. This switch defaults to FALSE if you specify the scsi_device parameter; otherwise, the switch defaults to TRUE. Examples The following example shows space usage information for all of the SCSI disks on the currently opened controller: AAC0>disk show space Executing: disk show space Scsi C:ID:L Usage Size 0:02:0 Array 64.0KB: 20.0MB 0:02:0 Free 20.0MB: 29.0MB 0:03:0 Free 64.0KB: 49.0MB 0:04:0 Free 64.0KB: 49.0MB 0:05:0 Free 64.0KB: 49.0MB 7-26