HP Workstation xw4100 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 314
Reset, Update, Verify, Version, C 0
![]() |
View all HP Workstation xw4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
Adaptec SCSI RAID Software Reference Guide ■ is a keyword specifying the AFU function to be performed. The keyword must immediately follow the AFU command. The valid command keywords are as follows: - HELP-Displays AFU help text - LIST-Lists the AFU-supported controllers installed on this system - RESET-Resets and restarts the controller - SAVE-Saves the contents of a controller's flash to the specified UFI file - UPDATE-Updates a controller's flash from the data in the specified UFI file - VERIFY-Compare the controller's current flash to the specified UFI file - VERSION-Displays the controller's current flash version information ■ /C is one or more controller IDs representing the set of controllers on which to perform the specified command. You can specify a single controller ID (for example, /C 0), multiple IDs separated by commas (for example, /C 0,2), or the keyword ALL to indicate all controllers. This switch is required. If no /C switch is specified, the system returns a fatal error message. See each individual command for the default switch values. ■ /D specifies the path (drive and directory) where the UFI files are located. If you do not specify the /D switch, the AFU looks for or creates its UFI files in the current default drive and directory. Note that you cannot specify the name of a UFI file, only its path. UFI file names are predefined, based on the controller type. 12-6
![](/manual_guide/products/hewlettpackard-xw8200-adaptec-scsi-raid-2120s-software-reference-guide-ea1ed4a/314.png)