HP XP20000/XP24000 HP StorageWorks MPX200 Multifunction Router User Guide (569 - Page 113
Hosts, Add Host, IP Ports, Enabled in CHAP Status, Save Changes
![]() |
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
iSCSI Port hpstorageworks General Tab Secret hpstorageworks Discovered iSCSI Initiator CHAPsecret01 Add Target Portal CHAPsecret0 iSCSI Presented Target N/A Log on to Target CHAPsecret01 NOTE: These are examples of secret settings. Configure CHAP using settings that apply to your network environment. 1. Enable CHAP for the MPX200 discovered iSCSI initiator entry (CHAP can be enabled via CLI only). a. If the iSCSI initiator is not listed when you execute the set chap command, do one of the following: • From HP Command View EVA, select Hosts, and then select the Add Host tab. Enter the IQN name string. • From the CLI, enter the initiator add command and add the iSCSI initiator that performs the discovery. b. If the iSCSI initiator is listed under the set chap command, then enable CHAP secret (for example: CHAPsecret01). • Select the index of the iSCSI initiator. • To Enable CHAP, select 0, and then enter the CHAP secret. 2. Enable CHAP for the MPX200 iSCSI port: a. To enable CHAP for the MPX200 iSCSI port using HP Command View: • Select the appropriate iSCSI Controller, then select the IP Ports tab, and then select the appropriate IP Port. • Under Security, select Enabled in CHAP Status, and then enter the CHAP Secret (for example, hpstorageworks). • Select the Save Changes tab to save the changes. b. To enable CHAP for the MPX200 iSCSI port using the MPX200 CLI: • Enter the set chap command. • Select the appropriate Portal iqn name index that the initiator logs in to. • Select 0 to enable CHAP. • Enter a CHAP secret. For example: hpstorageworks. MPX200 Multifunction Router User Guide 113
![](/manual_guide/products/hewlettpackard-xp20000xp24000-hp-storageworks-mpx200-multifunction-router-user-guide-56970568-2010-d8e05fd/113.png)