HP XP20000/XP24000 HP StorageWorks MPX200 Multifunction Router User Guide (569 - Page 186

Set features Applies license keys to the router. The date and time must be set on the router before applying a new key. Authority Syntax Admin session set features Set iSCSI Configures an iSCSI port. Authority Syntax Keywords Admin session set isc- [] si [] The number of the iSCSI port to be configured. Example: MPX200 (admin) #> set iscsi 1 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. WARNING: The following command might cause a loss of connections to both ports. Configuring iSCSI Port: 1 Port Status (0=Enable, 1=Disable) [Enabled ] Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto ] MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal ] Window Size (Min=8124B, Max=1048576B) [65536 ] IPv4 Address [10.3.5.205 ] IPv4 Subnet Mask [255.255.255.0 ] IPv4 Gateway Address [0.0.0.0 ] IPv4 TCP Port No. (Min=1024, Max=65535) [3260 ] IPv4 VLAN (0=Enable, 1=Disable) [Disabled ] IPv6 Address 1 [:: ] IPv6 Address 2 [:: ] IPv6 Default Router [:: ] IPv6 TCP Port No. (Min=1024, Max=65535) [3260 ] IPv6 VLAN (0=Enable, 1=Disable) [Disabled ] iSCSI Header Digests (0=Enable, 1=Disable) [Disabled ] iSCSI Data Digests (0=Enable, 1=Disable) [Disabled ] All attribute values for Port 1 that have been changed will now be saved. Set iSNS Configures the blade iSNS parameters. 186 Command referencecommand reference