HP XP20000/XP24000 HP StorageWorks MPX200 Multifunction Router User Guide (569 - Page 188

Set NTP Configures the NTP parameters. Authority Syntax Admin session set ntp Example: MPX200 (admin) #> set ntp A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. NTP (0=Enable, 1=Disable) [Disabled ] 0 TimeZone Offset from GMT (Min=-12:00,Max=12:00) [00:00 ] -8:0 IP Address [1] (IPv4 or IPv6) [0.0.0.0 ] 207.126.97.57 IP Address [2] (IPv4 or IPv6) [0.0.0.0 ] IP Address [3] (IPv4 or IPv6) [0.0.0.0 ] All attribute values that have been changed will now be saved. Set properties Configures blade CLI properties. Authority Syntax Admin session set properties Example: MPX200 (admin) #> set properties A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. CLI Inactivity Timer (0=Disable, 1=15min, 2=60min) [15min ] CLI Prompt (Max=32 Characters) [HP StorageWorks MPX200 ] All attribute values that have been changed will now be saved. Set SNMP Configures general SNMP) properties and eight trap destinations. Authority Syntax Admin session set sn- [trap_destinations]]] mp Example 1: The following example shows the set snmp command for setting general properties: 188 Command referencecommand reference