HP XP20000/XP24000 HP StorageWorks MPX200 Multifunction Router User Guide (569 - Page 88
MPxIO overview, Preparing the host system, Enabling MPxIO for an HP EVA storage array
![]() |
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
MPxIO overview The Sun multipathing software (MPxIO) provides basic failover and load-balancing capability to HP StorageWorks EVA4x00/6x00/8x00 storage arrays. MPxIO allows the merging of multiple SCSI layer paths, such as an iSCSI device exposing the same LUN through several different iSCSI target names. Because MPxIO is independent of transport, it can multipath a target that is visible on both iSCSI and FC ports. This section describes only the iSCSI implementation of MPxIO with the MPX200. For more information about MPxIO, see the Solaris Fibre Channel and Storage Multipathing Administration Guide, available at http://docs.sun.com/source/819-0139. Preparing the host system To verify that MPxIO is enabled: 1. Enter the following command: cat kernel/drv/iscsi.conf 2. Verify the MPxIO setting: mpxio-disable="no" If the setting is yes, change it to no, and then reboot: Reboot -- -r Example: MPxIO on all iSCSI port settings in /kernel/dev/iscsi.conf # Copyright 2006 Sun Microsystems, Inc. All rights reserved. # Use is subject to license terms. # #ident "@(#)iscsi.conf 1.2 06/06/12 SMI" name="iscsi" parent="/" instance=0; ddi-forceattach=1; # # I/O multipathing feature (MPxIO) can be enabled or disabled using # mpxio-disable property. Setting mpxio-disable="no" will activate # I/O multipathing; setting mpxio-disable="yes" disables the feature. # # Global mpxio-disable property: # # To globally enable MPxIO on all iscsi ports set: # mpxio-disable="no";# # To globally disable MPxIO on all iscsi ports set: # mpxio-disable="yes"; # mpxio-disable="no"; # Enabling MPxIO for an HP EVA storage array This section explains how to configure a Solaris server to recognize an HP storage array in an iSCSI multipath environment with the MPX200. Editing the scsi_vhci.conf file HP storage arrays are supported with MPxIO: • As symmetric devices only 88 MPX200 iSCSI configuration rules and guidelines
![](/manual_guide/products/hewlettpackard-xp20000xp24000-hp-storageworks-mpx200-multifunction-router-user-guide-56970568-2010-d8e05fd/88.png)