HP XP20000/XP24000 HP StorageWorks MPX200 Multifunction Router User Guide (569 - Page 172

WARNING: The following command might cause a loss of connections to both GE ports. Route ----1 2 FC Port ID ---------FC1 FC2 GE Port ID ---------GE1 GE2 Please select a FCIP route from the list above ('q' to quit): 1 Configuring FCIP Route FCIP Interfaces FC & GE (0=Enable, 1=Disable) IP Address (IPv4 or IPv6; 0=IPv6 Link Local) Subnet Mask Gateway IP Address Remote IP Address MTU Size (0=Normal, 1=Jumbo, 2=Other) TCP Window Size (0=8KB, 1=16KB, 2=32KB) Window Scaling (0=Enable, 1=Disable) Window Scaling Factor (Min=0, Max=9) TCP Port No. (Min=1024, Max=65535) GE Port Speed (0=Auto, 1=100Mb, 2=1Gb) Bandwidth, Mbit/sec (Min=1, Max=1000) VLAN (0=Enable, 1=Disable) FCIP SW Compression(0=Enable,1=Disable,2=Auto) Do you want to save/discard changes? (0=Save, 1=Discard) [Enabled [44.44.1.124 [255.255.0.0 [0.0.0.0 [44.44.1.158 [Normal [32768 [Enabled [2 [3225 [Auto [45 [Disabled [Disabled [Save 150 ] ] ] All attribute values for FCIP Route 1 will now be saved. MPX200 (admin) #> Example 3: MPX200 (admin) #> fciproute rm A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. WARNING: The following command might cause a loss of connections to both GE ports. Route ----1 2 FC Port ID ---------FC1 FC2 GE Port ID ---------GE1 GE2 Please select a FCIP route from the list above ('q' to quit): 1 FCIP Route 1 has been removed from the system. MPX200 (admin) #> 172 Command referencecommand reference