HP XP20000/XP24000 HP StorageWorks MPX200 Multifunction Router User Guide (569 - Page 173

FRU Saves and restores the router configuration. Authority Syntax Keywords Admin session to restore restore FRU save restore The fru restore command requires that you first FTP the tar file containing the configuration to the router. When you issue this command, the system prompts you to enter the restore level. You can fully restore the router's configuration (all configuration parameters and LUN mappings) or restore only the LUN mappings. The restored configuration does not take effect until the router is rebooted. save Creates a tar file containing the blade's persistent data, configuration, and LUN mappings. The file is stored in the router's /var/ftp directory. You must then FTP the tar file from the router. Example 1: The following is an example of the fru restore command: MPX200 (admin) #> fru restore A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Type of restore (0=full, 1=mappings only) [full] FRU restore completed. Please reboot the system for configuration to take affect. Example 2: The following is an example of the fru save command: MPX200 (admin) #> fru save FRU save completed. Configuration File is QLogic_Router_FRU.bin Please use FTP to extract the file out from the System. Help Displays a list of the commands and their syntax. Authority Syntax None help Example 1: The help command differs for the chassis and the blade. The following example shows the help command for the chassis: MPX200 #> help admin [begin | end | start | stop | cancel] blade [1 | 2] exit help MPX200 Multifunction Router User Guide 173