HP Z420 HP Z420, Z620, and Z820 Workstation Series User Guide - Page 31
Converting to desktop configuration (Z420 only)
View all HP Z420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Converting to desktop configuration (Z420 only) This workstation can be operated in mini-tower or desktop configuration. Follow these steps to convert to desktop configuration: NOTE: See a video of this task at http://www.hp.com/go/sml. 1. Prepare the workstation for component installation. 2. Remove the front bezel from the workstation. 3. Press gently on the edges of the optical drive bay filler panel and remove it from the front bezel. Figure 3-6 Removing the ODD bay filler panel 4. Rotate the filler panel 90 degrees to a horizontal position. 5. Align the slots in the filler panel frame with the tabs in the front bezel. Press the optical drive filler panel back into the front bezel until it snaps into place. Figure 3-7 Installing the ODD bay filler panel Converting to desktop configuration (Z420 only) 23