HP mp3222 HP mp3220 series digital projector - User's Guide - Page 45

Install the cover and tighten the two screws.

Get HP mp3222 - Digital Projector PDF manuals and user guides View all HP mp3222 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Maintaining the Projector 1. Turn off the projector and allow it to cool for 30 minutes. 2. On the bottom of the projector, loosen the two screws on the lamp cover and remove the cover. 3. Loosen the two screws on the lamp module and pull out the module. 4. Insert the lamp module and tighten the two screws. 5. Install the cover and tighten the two screws. 6. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp again. 7. Open the on-screen menu and select Setup > Reset lamp hours. User's Guide 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
User’s Guide
45
Maintaining the Projector
1.
Turn off the projector and allow it to cool for 30 minutes.
2.
On the bottom of the projector, loosen the two screws on the lamp cover and
remove the cover.
3.
Loosen the two screws on the lamp module and pull out the module.
4.
Insert the lamp module and tighten the two screws.
5.
Install the cover and tighten the two screws.
6.
Turn on the projector. If the lamp does not turn on after the warm-up period, try
reinstalling the lamp again.
7.
Open the on-screen menu and select
Setup > Reset lamp hours
.