HP mp3222 HP mp3220 series digital projector - User's Guide - Page 52
To install for rear projection, Setup > Projector position., Rear Table, Rear Ceiling
View all HP mp3222 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing Permanently If you do not use an HP ceiling mount, mount the projector according to the following dimensions: ■ X = 82 mm (3.23 in.) ■ Y = 55 mm (2.17 in.) ■ Z = 110 mm (4.33 in.) ■ Thread size = M3 To install for rear projection 1. Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is designed for rear projection. See "To set up on a table" on page 17 or "To install on the ceiling" on page 50 for more instructions. 2. Open the on-screen menu and select Setup > Projector position. Then select Rear Table or Rear Ceiling from the drop-down list. 52 User's Guide
52
User’s Guide
Installing Permanently
If you do not use an HP ceiling mount, mount the projector according to the following
dimensions:
■
X = 82 mm (3.23 in.)
■
Y = 55 mm (2.17 in.)
■
Z = 110 mm (4.33 in.)
■
Thread size = M3
To install for rear projection
1.
Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is
designed for rear projection.
See “To set up on a table” on page 17 or “To install on the ceiling” on page 50 for
more instructions.
2.
Open the on-screen menu and select
Setup > Projector position.
Then select
Rear Table
or
Rear Ceiling
from the drop-down list.