HP mp3222 HP mp3220 series digital projector - User's Guide - Page 50

To install on the ceiling, with the ceiling mount. - parts

Get HP mp3222 - Digital Projector PDF manuals and user guides View all HP mp3222 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Installing Permanently To install on the ceiling Å WARNING: To minimize the risk of injury from improperly installed equipment, it is recommended that a professional installer performs the ceiling installation. ✎ The actual projector and mounting plate differ from those shown below, but the steps are the same. 1. Attach the mounting plate to the bottom of the projector. The pointed part of the hole in the bracket faces the back of the projector. See the instructions that came with the ceiling mount. 2. Attach the ceiling-mount bracket to the ceiling, and firmly secure with three or four screws capable of holding 9 kg (20 lb). The ceiling-mount bracket must be located 1.2 to 12 m (4 to 40 ft) in front of the screen. See the table in "Setting Up the Projector" on page 15. 50 User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
50
User’s Guide
Installing Permanently
To install on the ceiling
Å
WARNING:
To minimize the risk of injury from improperly installed equipment, it
is recommended that a professional installer performs the ceiling installation.
The actual projector and mounting plate differ from those shown below, but the steps
are the same.
1.
Attach the mounting plate to the bottom of the projector. The pointed part of the
hole in the bracket faces the back of the projector. See the instructions that came
with the ceiling mount.
2.
Attach the ceiling-mount bracket to the ceiling, and firmly secure with three or
four screws capable of holding 9 kg (20 lb). The ceiling-mount bracket must be
located 1.2 to 12 m (4 to 40 ft) in front of the screen. See the table in “Setting Up
the Projector” on page 15.