HP nx6125 HP Compaq nx6115 and nx6125 Notebook PC - Maintenance and Service Gu - Page 151
Remove the 3 Torx T8M2.5×7.0 screws
View all HP nx6125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Removal and Replacement Procedures 2. Use a 3/16-inch Hex socket wrench to remove the 2 HM3.0×10.0 screw locks on each side of the external monitor connector. Removing the System Board Screw Locks 3. Disconnect the Bluetooth cable 1 and RJ-11 connector module cable 2 from the system board. 4. Remove the 3 Torx T8M2.5×7.0 screws 3 that secure the system board to the base enclosure. Removing the System Board Screws and Disconnecting the System Board Cables Maintenance and Service Guide 6-51
Removal and Replacement Procedures
Maintenance and Service Guide
6–51
2. Use a 3/16-inch Hex socket wrench to remove the
2 HM3.0×10.0 screw locks on each side of the external
monitor connector.
Removing the System Board Screw Locks
3. Disconnect the Bluetooth cable
1
and RJ-11 connector
module cable
2
from the system board.
4. Remove the 3 Torx T8M2.5×7.0 screws
3
that secure the
system board to the base enclosure.
Removing the System Board Screws and Disconnecting the
System Board Cables