Hitachi 51F59 Owners Guide - Page 55
Setup, Magic, Focus Tune Up, Manual Adjustment Mode, 9, Point Manual, Start, Cursor, White, Select,
View all Hitachi 51F59 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Setup Manual Convergence Adjustment Mode (9 Point Manual Adjustment) NOTE: 1. Please turn ON your television for at least 20 minutes before using this feature. 2. AUTO ADJUSTMENT MODE is recommended. If convergence is still not acceptable, use the MANUAL ADJUSTMENT MODE. 3. If AUTO ADJUSTMENT MODE is selected or the MAGIC FOCUS button is pressed, all manual adjust mode settings will be erased. Using the Remote Control, select SETUP, MAGIC FOCUS TUNE UP, MANUAL ADJUSTMENT MODE, 9 POINT MANUAL, START to access convergence 9 point pattern. The adjustment point is indicated by the Adjustment Point Cursor. To Move Adjustment Point To move the Adjustment Point Cursor using the CURSOR buttons, the Adjustment Point Cursor must be WHITE. Another way to move the Adjustment Point Cursor is to press the following buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the adjustment point is WHITE, it will change to RED. To Change the Color of Adjustment Point Press the SELECT button repeatedly (WHITE-REDBLUE-WHITE...). GREEN color is fixed and cannot be adjusted. To Adjust the Convergence Move the Adjustment Point Cursor to the point to be adjusted. Use the CURSOR buttons to match the RED and BLUE colors to GREEN (reference color). Properly aligned, all three colors should appear white. MENU Video Audio Aspect Channel Manager Locks Timers Setup Move SEL Select Setup Magic Focus Tune Up OR Menu Preference Set The Inputs Set Virtual HD Set Black Side Panel Set Closed Captions Set Audio Out Upgrades Move SEL Set Setup Magic Focus Tune Up OR Aligns the Red, Green and Blue colors to correct for Magnetic Influences. Adjustment Mode Auto At turn off 9 Point Manual after 90 days. 117 Point Manual If you want to adjust now start Move SEL Return Adjustment Point Cursor If convergence is acceptable after MANUAL CONVERGENCE adjustment, press EXIT button to EXIT access menu mode. 1. Use the CURSOR buttons to highlight your chosen option. 2. Press the SELECT button to select. 3. Select CANCEL to cancel adjusted data and return to main picture. Setup Magic Focus Tune Up Manual Adjus t Pleas e s elec t button Canc el Done Bac k Res et Move SEL R eturn 4. Select DONE to save your adjustments and return to main picture. 5. Select BACK to return to the manual convergence adjustment mode. 6. Select RESET to recall the factory pre-set convergence data. On-Screen Display 55