Hitachi 51F59 Owners Guide - Page 63
a left side, b right side
View all Hitachi 51F59 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
57" Disassembly/Assembly Instructions ASSEMBLY PROCEDURE STEP 8 To re-assemble the set, lift the top portion and align onto the bottom cabinet. Gently lower the top portion until it sits flush on the bottom. STEP 9 Re-install the joint connector bolts (2 pcs.) that were removed in step 5 of the disassembly. STEP 10 (a) (b) Re-install the top (4) four screws into the lower rear cover, see (a). Re-install the (4) four side screws that hold the back cover to the cabinet, see (b). Useful Information STEP 11 (a) (b) Re-connect the sensor wires connector to the sensor sensor board, see (a). Hold the wires with the plastic holders ; so the wires do not become losse(b). ¿» · ³ ¿ STEP 12 (a) (b) Re-install 4 screws that hold the screen frame to the cabinet on the Right side, see (a) and (b). Repeat to re-install 4 screws on the Left side. (a) (b) STEP 13 Please re-install screw (³) below screen frame that hold the back cover to the cabinet as the arrows shows. (a) left side Please re-install screw (· ) below screen frame that hold the back cover to the cabinet as the arrows shows. ³ (b) right side · STEP 14 (a) (b) (c) Re-install both of the front decoration panels see (a) and reinstall the speaker grille by aligning it with the bo- ttom cabinet (b), finally put the two screws of the speaker grille as seen on (c). This completes the Disassembly and Assembly instructions. NOTE : On step 5 and 8 it might be a different type of screw , so the Allen Key to remove the screws will not be included in the accessories. 63