Hitachi 51F59 Owners Guide - Page 64
Hitachi
View all Hitachi 51F59 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
65 6"5D"isDaisssaesmsebmlyb/Alys/sAesmsebmlybIlnysItnrsutcrtuioctnisons IMPORTANT POINTS: (a) Do not attempt to perform this work by yourself. (b) Request an installation specialist to install this unit. (c) HITACHI assumes no responsibility or liability for injury/damage as a result of consumer installation and handling. Be advised that improper consumer installation/handling is not covered by manufacturer's warranty. (d) This Projection Television weighs 309 pounds and has many sensitive components. CAUTION: DISCONNECT UNIT FROM POWER SOURCE BEFORE DISASSEMBLY/ASSEMBLY DISASSEMBLY PROCEDURE NOTE: Read all instructions and understand how to properly and safely disassemble and assemble unit STEP 1 Before disassembling this projection TV set, you (a) must first remove the speaker grille by grabbing the (b) sides and pulling left and right side see (a)(b). Remove the front decoration panels by unscrewing the 2 screws from each panel (left & right), see (c), then remove from the original position, see (d)(e). (c) (d) (e) Useful Information STEP 2 Remove the 8 (a) screws that hold the screen frame to the cabinet on the front side. DO NOT remove the right and left edge screen frame screws (c). STEP 3 Locate the SENSOR PWB attaced to the cabinet (a). Losen the sensor wires from the plastic holders in order to remove the 3 wires that comes from the screen, see (b). Disconnect the 3 connector wires as it shows on picture (c) & (d). (c) (b) (c) (a) (b) (d) 64