Hitachi 51F59 Owners Guide - Page 58

Setup INPUT 3 Auto Link Use this function to automatically turn the TV on and tune to INPUT 3 when it detects a video signal to INPUT 3. 1. Use the CURSOR buttons ̇ or ̈ to highlight the AUTO LINK setting of your choice. 2. When AUTO is selected, the TV will turn on and tune to INPUT 3 automatically, when the INPUT 3 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player or DVD player. Setup OR Set The Inputs Rename List Input1 Input2 Input3 Input4 Input5 AVR CAM CBL CBL2 Reset Auto Link DVD DVD2 DVD3 LD PVR PVR2 SAT STB STB2 VCR VCR2 VCR3 Auto Remote Off Move SEL Return 3. When REMOTE is selected, the TV will turn on and switch to INPUT 3 automatically when the INPUT 3 input device is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed. This is convenient when you want to record a movie with your VCR and watch it later. 4. Select OFF to disable this function. 5. Press EXIT to quit menu or select AUTO LINK to return to previous menu. NOTE: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc or DVD player OFF. This feature is now reset and will turn on your TV as described above. 2. When using REMOTE mode, any remote control button will substitute for your video input device play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button. 3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours. Set Virtual HD Use this feature to select between 1080i and 540p OR scan mode. Set Virtual HD Next/Prev. 1080i Select SEL Return On-Screen Display When content from film is sent to your home it requires processing that can cause picture noise or distortion. Virtual HD technology reduces this noise to a minimum, recreating the smooth curves and high fidelity image of the original film source. N O T E : VIRTUAL HD is not available (grayed out) in Digital Channels, 1080i input, HDMI and components. Set Black Side Panel The BLACK SIDE PANEL function turns the gray side OR bars on/off when watching 4:3 signals in Standard mode. The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE. The TV set will always return to "Set Black Side Panel -OFF" setting every time the TV is powered "OFF". Set Black Side Panel Next/Prev. On/o Off SEL Return NOTE: To maximize operating life of the TV's picture tubes when watching 4:3 signal, Black Side Panel is cancelled at Power OFF. It is recommended to watch 4:3 signal with gray side bar. 58