Hitachi CMP4221U Owners Guide - Page 11

ENGLISH Remote Control l POWER ON button 16 HDMI button 17 RGB button 17 AV2 button 17 AV3 button 17 OK button 19 MENU button 19 AUTO button 18 PIP button 25 16 POWER OFF button 16 POWER ON/OFF b tt 17 AV1 button 17 VOLUME UP/DOWN buttons 17 MUTE button 17 AV4 button 19 SELECT/OK buttons 19 RETURN button 18 RECALL button 17 SIZE button Loading Batteries 1. Open the battery cover. Slide back and remove the battery cover in the direction of the arrow. Handing the Remote Control Handling the Remote Control Use the remote control within about 5m from the front of the unit's remote-control sensor and within 30 degrees on both sides. 2. Load batteries. Load two Size AAA batteries included observing the Polarities. 3. Close the battery cover. Replace the battery cover in the direction of the arrow and snap it back into place. With in 30 degrees About 3m With in 30 degrees About 3m About 5m CAUTION z Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains. z When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains. ATTENTION z Do not drop or impact the remote control.. z Do not splash the remote control with water or put it on a wet object. z Before leaving the remote control out of use for an extended period of time, remove the batteries from it. z If the remote control begins to lack responsiveness, replace the batteries. z Strong light, such as direct sunlight, shining on the photoreceptor of the remote control can cause operational failure.Position this unit to avoid direct contact with such light. 11