Hitachi CMP4221U Owners Guide - Page 12

ENGLISH INSTALLATION INSTRUCTIONS Installation the Desktop stand (option) • If you have purchased the model without the stand attached: When installing the monitor, use the optional Desktop stand. The Desktop stand has been used for the illustrations in this manual. WARNING Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation. CAUTION x Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt this by our self. Ask your dealer to provide the name of a qualified installer. x In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches: For a desktop set- up) or more between the sides and other objects such as walls, etc., so that the ventilation holes are not blocked. (*) 10cm (4 inches) or more* Clamp Cord or chain Anti-tumble measures CAUTION Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury. Securing to a wall or pillar Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar. Hook Chain Clamp cord or chain Wall or Pillar Securing desktop 1) Using wood screws (two) fasten the set to the clamping screw holes on the rear of the stand as shown. 2) Using commercially available wood screws, secure the set firmly in position. Mounting the Speaker Unit (option) Refer to the instruction manual concerning mounting of the optional speaker unit. Wood Two places 12