Honeywell 7600BP-121-21EE User Guide - Page 122

Back Panel, Supplying Power to the QuadCharger Device

Get Honeywell 7600BP-121-21EE - Hand Held Products Dolphin 7600 PDF manuals and user guides View all Honeywell 7600BP-121-21EE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 122 highlights

Back Panel Power Supply Connector Power Switch Power Supply Connector Use this connector to attach the power supply to the QuadCharger device. The universal power supply accepts input voltages between 90-265 volts. Power Switch Toggle the power switch to turn the QuadCharger device on and off. Supplying Power to the QuadCharger Device Use the power adapter cable that comes with the QuadCharger device so that the input voltage is adjusted appropriately. 1. Locate the AC power adapter cable and plug it into the power source. 2. Connect the power cable to the power adapter. 3. Connect the power cable to the power supply connector on the back of the QuadCharger device. 4. Press the power switch to the ON position. 5. The device performs the following power-up diagnostic routine for each slot indicated by the Status LEDs: • All ON Orange • delay (500ms) • All ON Red • delay (500ms) • All ON Green • delay (500ms) • All OFF 11 - 2 Downloaded from www.Manualslib.com manuals search engine Rev A 5/23/2008 Dolphin® 7600 Mobile Computer User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
11 - 2
Rev A
5/23/2008
Dolphin® 7600 Mobile Computer
User’s Guide
Back Panel
Power Supply Connector
Use this connector to attach the power supply to the QuadCharger device. The universal
power supply accepts input voltages between 90-265 volts.
Power Switch
Toggle the power switch to turn the QuadCharger device on and off.
Supplying Power to the QuadCharger Device
Use the power adapter cable that comes with the QuadCharger device so that the input voltage is
adjusted appropriately.
1.
Locate the AC power adapter cable and plug it into the power source.
2.
Connect the power cable to the power adapter.
3.
Connect the power cable to the power supply connector on the back of the QuadCharger device.
4.
Press the power switch to the ON position.
5.
The device performs the following power-up diagnostic routine for each slot indicated by the Status
LEDs:
•
All ON Orange
•
delay (500ms)
•
All ON Red
•
delay (500ms)
•
All ON Green
•
delay (500ms)
•
All OFF
Power Supply Connector
Power Switch
Downloaded from
www.Manualslib.com
manuals search engine