Honeywell 7600BP-121-21EE User Guide - Page 44
Suspend Mode, Care and Cleaning of the Dolphin Terminal
View all Honeywell 7600BP-121-21EE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Suspend Mode Suspend mode suspends terminal operation. The terminal appears to be "off" when in suspend mode. The terminal is programmed to go into suspend mode automatically when inactive for a specified period of time. You can set this time period in the Power setting. To Put the Terminal in Suspend Mode Press the Blue + Backlight keys. Note: You should always put the terminal in suspend mode when you change the battery pack; see Changing the Main Battery Pack on page 3-21. To Resume Terminal Operation To resume terminal operation (or "wake" the terminal from suspend mode), • Press the Blue + Backlight keys. • Press the Scan key . • If not in a scanning or imaging application, press one of the side buttons (see page 3-12). Troubleshooting Suspend/Resume If the terminal does not wake when you press the Scan key, the main battery might be too low to resume operation. To check, remove the battery and install a fully charged battery or connect the terminal to a Dolphin charging peripheral. Care and Cleaning of the Dolphin Terminal When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth. 3 - 26 Downloaded from www.Manualslib.com manuals search engine Rev A 5/23/2008 Dolphin® 7600 Mobile Computer User's Guide