Honeywell 7600BP-121-21EE User Guide - Page 37
Setting Up the Host Workstation, Communicating with the Dolphin Terminal, Synchronizing with
View all Honeywell 7600BP-121-21EE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Setting Up the Host Workstation Verify that ActiveSync is configured to use the appropriate communication type by clicking File > Connection Settings. For USB communication, check Allow USB connections. For RS-232 communication, connect to COM1. Note: You can have both USB and RS-232 selected in the software without impacting processing. However, your hardware setup should use only RS-232 or USB, not both. Communicating with the Dolphin Terminal After setting up both the workstation and the terminal, ActiveSync connection should be automatic. 1. Connect the Dolphin terminal to the a communication peripheral, such as the Dolphin HomeBase. 2. The Dolphin terminal automatically opens ActiveSync to establish a connection. Synchronizing with the Host Workstation After setup, synchronization begins automatically whenever the terminal's mechanical connector connects to a Dolphin peripheral that is connected to a host workstation with ActiveSync installed. Exploring the Terminal from the Workstation When the terminal and workstation are connected, open the main ActiveSync window (on the desktop), and click Explore. Dolphin® 7600 Mobile Computer User's Guide Downloaded from www.Manualslib.com manuals search engine Rev A 5/23/2008 3 - 19