Honeywell 7600BP-121-21EE User Guide - Page 61
Activating the Engine, Decoding
View all Honeywell 7600BP-121-21EE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Activating the Engine When a scanning application is open, press the SCAN key to activate the image engine. You can also press one of the side buttons (see page 3-12), which are programmed to activate the image engine in a scanning application by default. Using Demos Demos are software utilities loaded on all Dolphin terminals that demonstrate the advanced features of the terminal. There are two Demos feature the image engine: Image Demo and Scan Demo. To access these demos, tap Start > Demos, • Select Scan Demo to verify decoding, or • Select Image Demo to verify imaging. For more information about Demos, refer to the Dolphin Demos User's Guide, which is available for download from www.honeywell.com/aidc. LEDs The LEDs in the center of both keyboards (for location, see LEDs on page 4-1) light when using the image engine. Scan LED The LED on the right lights red when you press the scan trigger in scanning applications. Decode LED The LED on the left lights green when a scanned bar code is successfully decoded. Decoding The Dolphin terminal supports two types of image decoding: full-area imaging and Advanced Linear Decoding (ALD). Full-area Imaging Full-area imaging means that the Dolphin terminal support omni-directional aiming, which means that a positive read can be obtained from many positions. For details, see OmniDirectional Scanning Positions on page 5-4. ALD ALD provides fast reading of linear (1D) and stacked linear bar codes (PDF417). For the best read, the aiming pattern should be centered horizontally across the bar code. When ALD is enabled, the reader does not read matrix or postal codes. To Decode a Bar Code 1. Tap Start > Demos > Scan Demo. 2. Position the Dolphin terminal over one of the sample bar codes on page 5-4. A range of 4-10 inches (10-25 cm) from the bar code is recommended. 3. Project the aiming brackets by pressing and holding the SCAN key. The Scan LED lights red. 4. Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the bar code to achieve optimal decoding; Omni-Directional Scanning Positions, page 5-4 Dolphin® 7600 Mobile Computer User's Guide Downloaded from www.Manualslib.com manuals search engine Rev A 5/23/2008 5 - 3