Honeywell 7600BP-121-21EE User Guide - Page 83
Receiving Data
View all Honeywell 7600BP-121-21EE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
5. When the IrDA port finds the IrDA port of the other device, it immediately starts sending the selected file. The selected device reads "Sending." 6. When the file transfer is complete, the selected device reads "Done." Receiving Data The Beam Setting must be set to receive for the terminal to receive data from other infrared devices. 1. Verify that beam settings are set to receive. Tap Start > Settings > Connections tab > Beam. The Beam Settings window should appear as follows: 2. Align the IrDA ports. 3. Have the owner of the other device send the information to you. 4. Your terminal automatically begins receiving it. 5. A popup message appears asking if you want to receive the incoming file. 6. Tap Yes to receive the file. Dolphin® 7600 Mobile Computer User's Guide Downloaded from www.Manualslib.com manuals search engine Rev A 5/23/2008 7 - 3