Honeywell MK7580-30B41-00 User Guide - Page 18

Installation of Adapter Kit 46-00911, There are two tabs located on the locking plate.

Get Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis PDF manuals and user guides View all Honeywell MK7580-30B41-00 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Installation of Adapter Kit 46-00911 1. Remove the rubber feet on the bottom of the MS7580. 2. Attach the adapter plate to the bottom of the imager with the four M3 x .5 x 10 mm screws (  ) provided in the kit. 3. Attach the base plate to the adapter plate with the four M3 x .5 x 8 mm screws (  ) provided in the kit. Figure 11 4. Before mounting the locking plate, consider the position the imager will rest when fully installed. There are two tabs located on the locking plate. These tabs indicate the two directions the imager may face when locked into position (see figure below). Figure 12 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
14
Installation of Adapter Kit 46-00911
1.
Remove the rubber feet on the bottom of the MS7580.
2.
Attach the adapter plate to the bottom of the imager with the four
M3 x .5 x 10 mm screws (
) provided in the kit.
3.
Attach the base plate to the adapter plate with the four M3 x .5 x 8 mm
screws (
) provided in the kit.
Figure 11
4.
Before mounting the locking plate, consider the position the imager will rest
when fully installed.
There are two tabs located on the locking plate.
These tabs indicate the two directions the imager may face when locked
into position (see figure below).
Figure 12